Clear-container focus
The series is positioned for transparent bottles, cosmetic containers, jars and shaped packaging where clarity and surface finish are part of the product specification.
PETG · 0.1–15 L
Reference image
Machine series
PETG Double-Station Extrusion Blow Molding Machine
A double-station PETG configuration for 0.1–15 L transparent bottles, jars and shaped containers. The catalog lists 1–4 cavities and PETG as the raw material.
- Range
- 0.1–15 L
- Station
- Double station
- Cavities
- 1–4
- Layers
- Project-specific
Materials: PETG
PETG changes the selection conversation. The material is processed for clarity and surface finish, so drying, melt temperature, mold cooling and parison control matter as much as headline capacity.
The E-SHION catalog lists a PETG double-station machine for 0.1–15 L products with one to four cavities. Because the catalog does not publish a separate model-specific power table for this configuration, the final screw, die head and utility requirements must be confirmed against the product and resin grade.
Design intent
What this platform is built around
Double-station output
Two stations and one to four cavities allow the machine to be matched to a compact clear-container line. Final output depends on wall thickness, cycle time and cooling.
Material handling is part of the project
PETG normally requires controlled drying and a suitable temperature profile. The resin supplier's data sheet should define the starting process window before the machine configuration is fixed.
Specifications
Models in this series
The catalog publishes a configuration summary rather than a separate numbered model power table.
| Parameter | Catalog value | Unit |
|---|---|---|
| Product volume | 0.1–15 | L |
| Raw material | PETG | — |
| Station | Double station | — |
| Cavity | 1–4 | — |
Source: E-SHION product catalog, pages 05–10. Specifications are subject to change without notice; customization is available.
Machine details
The working areas behind the numbers
Typical applications
Where this platform is used
Household & Personal Care Packaging
Shampoo, detergent, lotion and cleaner bottles where surface quality and repeatable wall thickness matter.
View
Food & Beverage Packaging
Oil, water, juice, dairy and food bottles, from small formats to multi-litre containers.
View
PETG Clear Packaging
Transparent bottles, jars and shaped containers where clarity, gloss and surface finish drive the specification.
ViewQuestions buyers ask
Questions about this series
Answers use the catalog values and state where the final check depends on the mold.
FAQWhich models are in the PETG · 0.1–15 L series?
The catalog lists a PETG double-station configuration for 0.1–15 L with 1–4 cavities; it is not presented as a separate numbered model.
What is the maximum product volume for this series?
The catalog range is 0.1–15 L. The maximum is a catalog value for the platform; the actual container must still be checked against mold dimensions, platen size and platen spacing.
What information is needed to confirm a configuration?
A container drawing or sample, material grade, target output, cavity preference, existing mold data and destination voltage/frequency. The mold interface and utility schedule are then checked before a quotation is finalized.
Request a quotation for PETG · 0.1–15 L
Send the container drawing for this series.
Include the material, target output, cavity preference and existing mold data. The reply will confirm the model or explain why another platform is a better fit.