1L Plastic Bottle Blow Molding Machine | Small Bottle Production
A 1L bottle extrusion blow molding machine in production: mold area, parison and finished small bottle take-out.
Production videos
Watch the machines run.
Short clips from the production floor: parison extrusion, mold closing, blowing and take-out. No studio renders and no stock footage — the clips show the working area as it is.
All clips
Grouped by container, not by edit.
Small bottles, multi-cavity molds, jerrycans, large containers and clear PETG parts. The clip lengths differ because they were filmed on site, not produced to a fixed run time.
2L Plastic Bottle Blow Molding Machine | Extrusion Blow Molding
A production cycle on a 2L bottle machine: clamp unit, mold area and bottle take-out.
5L Plastic Jerrycan Blow Molding Machine | Production Cycle
Parison extrusion, mold closing, blowing and take-out of a finished 5L jerrycan.
6-Cavity Small Bottle Blow Molding Machine | Multi-Cavity Production
A six-cavity machine producing small bottles; multiple bottles are visible in the mold and take-out area.
12L Plastic Container Blow Molding Machine | Large Container Production
Close-up of the mold area and finished container take-out on a 12L container machine.
30L Plastic Container Blow Molding Machine | Large Container Production
Clamp and mold area of a 30L container machine, with a finished large container shown at the end.
PETG Clear Container Blow Molding Machine | Transparent Jar Production
A PETG clear container machine; the transparent jar shows the clarity and surface finish of the process.
4-Cavity Extended Blow Molding Machine | Urea Tank Production
A four-cavity extended-mold machine for long urea tank and jug components; the long parts are visible during the cycle.
Footage comes from production floors. Machine configuration, station count and mold can differ from a catalog model; the clips show how the process runs, not a quotation.
More on YouTube
New clips are published on the channel first. If you need a specific container size, material or cavity count, ask for footage of a comparable machine before you shortlist a model.
Next step
Send the container drawing.
A clip shows the working principle. The drawing, material and output target decide the machine configuration.