Two stations for higher cycle output
A second station allows two molds or two sets of cavities to run in a coordinated cycle. Actual output depends on cycle time, cavity count, wall thickness and take-out automation.
Double-station · 0.1–16 L
Reference image
Machine series
Double-Station Extrusion Blow Molding Machine
A double-station platform for higher output per cycle across 0.1–16 L containers. Available models cover 2, 5, 10 and 16 L maximum product volumes.
- Range
- 0.1–16 L
- Station
- Double station
- Cavities
- 1–6
- Layers
- 1–6
Materials: PE, PP, HDPE, HDPP, PC, PVC, PETG, EVOH
The double-station series adds a second clamping station to the same 0.1–16 L product envelope. That layout is aimed at higher output or a more balanced use of the extruder when running smaller containers.
Available models are ES-2LD, ES-5LD, ES-10LD and ES-16LD. Compared with the single-station equivalents, extrusion capacity and installed power are higher, because the machine is configured to support two production stations.
Design intent
Double-Station Blow Molding Machine Features and Components
Shared extruder platform
The extruder and die-head configuration are sized for the station count. Extruding capacity ranges from 60–80 kg/hr on the ES-2LD to 130–160 kg/hr on the ES-16LD.
Same container envelope
The series is listed for 0.1–16 L products, making it suitable for beverage, household, personal-care and small industrial containers.
Specifications
Models in this series
Select a model for its complete specification table.
| Model | Max. product volumeL | Clamping forcekN | Platen spacing (daylight)mm | Die plate sizemm | Screw diametermm | Extruding capacitykg/hr | Installed powerkW | Machine weightt | View |
|---|---|---|---|---|---|---|---|---|---|
| ES-2LD | 2 | 100 | 150–385 | 290 × 320 | 60–70 | 60–80 | 26–35 | 4.5 | View ES-2LD specs |
| ES-5LD | 5 | 100 | 145–505 | 320 × 380 | 70–80 | 100–120 | 34–45 | 6 | View ES-5LD specs |
| ES-10LD | 10 | 110 | 220–600 | 450 × 480 | 80–90 | 130–160 | 45–55 | 8 | View ES-10LD specs |
| ES-16LD | 16 | 155 | 230–620 | 500 × 490 | 90 | 130–160 | 50–65 | 10 | View ES-16LD specs |
Swipe the table to see all columns →
Source: E-SHION product data. Specifications are subject to change without notice; customization is available.
Machine details
Extruder, Die Head and Clamping Unit
Typical applications
High-Output Bottle and Jar Blow Molding Applications
Household & Personal Care Packaging
Shampoo, detergent, lotion and cleaner bottles where surface quality and repeatable wall thickness matter.
View application
Food & Beverage Packaging
Oil, water, juice, dairy and food bottles, from small formats to multi-litre containers.
View application
PETG Clear Packaging
Transparent bottles, jars and shaped containers where clarity, gloss and surface finish drive the specification.
View applicationMachine video
Watch the 0.1–16 L blow molding machine in production
A production cycle on a 2L bottle machine: clamp unit, mold area and bottle take-out.
Clip shows the die-head and mold area during a production cycle. Audio removed for autoplay.
All production videosMore machine clips
More clips from the double-station range
Four-parison extrusion, the mold opening cycle and a wide-mouth container run on 0.1–16 L machines.
2L Plastic Bottle Blow Molding Machine | Four-Parison Extrusion and Bottle Take-Off
Four parisons leave the die head together and index into the mold, followed by bottle take-off — a clear look at multi-parison timing.
2L Plastic Bottle Blow Molding Machine | Mold Opening Cycle
The clamp opens and the finished 2L bottles are exposed in the mold — a short, clear view of the mold cycle.
Wide-Mouth Plastic Container Blow Molding Machine | Open Mold and Finished Container
A wide-mouth container in the open mold, with the finished part shown at the end of the cycle.
Questions buyers ask
Blow Molding Machine FAQ
Answers use published values and state where the final check depends on the mold.
FAQWhich models are in the Double-station · 0.1–16 L series?
Available models: ES-2LD, ES-5LD, ES-10LD, ES-16LD. Each model page shows the complete specification table.
What is the maximum product volume for this series?
The series range is 0.1–16 L. The maximum is the platform limit; the actual container must still be checked against mold dimensions, platen size and platen spacing.
What information is needed to confirm a configuration?
A container drawing or sample, material grade, target output, cavity preference, existing mold data and destination voltage/frequency. The mold interface and utility schedule are then checked before a quotation is finalized.
How is a blow molding machine from this series priced?
The price is quoted per project: model, mold, cavity layout, material, drive and control configuration, and destination voltage all change the configuration. No list prices apply. Send the container drawing and target output for an itemised quotation.
What determines the cycle time for this series?
Cooling, wall thickness, resin and mold design usually set the cycle before extruder capacity does. The specification table above lists extruding capacity and installed power per model; the final cycle is measured on your mold during commissioning.
Request a quotation
Send the container drawing for this series.
Include the material, target output, cavity preference and existing mold data. The reply will confirm the model or explain why another platform is a better fit.