Two machines can blow the same 10 L jerrycan from the same mold and still differ two years later: who can supply a PLC module, who can open the program, and how closely the wall follows the handle. Buyers comparing a blow molding machine PLC usually ask about the brand first. The more useful question is which layer of the control system you are choosing, and how many parison-control points the container actually needs.

Does the PLC brand matter on a blow molding machine?

Yes, but mostly after installation. The PLC brand affects spare-part sourcing, programming software and local service familiarity; the parison-control point count sets how finely the die gap follows the profile from neck to base. Neither fixes wall thickness alone — clamp force, temperature, die centering and mold still decide the result.

Siemens, Omron and Moog are often listed in the same sentence, but they usually sit in different layers. Siemens and Omron are normally discussed as the machine PLC and HMI; Moog is normally discussed as parison-control hardware. A machine can therefore have one brand at the top and another shaping the die gap. Ask for both, plus the model numbers, rather than a single brand name.

What the PLC brand changes after installation

Brand matters less on the day of acceptance than in year three. The practical questions are who stocks the module, how long a replacement takes, whether your maintenance team can upload and edit the program, and whether the machine can share data with your line.

  • Spare modules: local stock, lead time and price — confirm in writing, not verbally.
  • Programming access: software version, licence, password policy and whether you may edit recipes or logic.
  • Communication: which protocol the PLC offers for weighing, dosing or line data — confirm the option list.
  • Service familiarity: whether your electrician or a local integrator has worked on that family before.
  • Parison-controller pairing: whether the chosen PLC and wall-thickness controller are a tested combination.

Parison control points: 30, 100 or 200?

In most parison controllers, one point equals one axial die-gap position, so the point count sets how many steps the wall profile can follow from neck to base. More points give finer resolution, but only if the die-gap actuator, temperature control and parison stability can keep up. Point count is a resolution choice, not a quality guarantee.

Planning framework for parison-control points — confirm actual resolution and actuator type with the control supplier.
Control points Axial resolution Where it usually fits Confirm before ordering
30 pointsAbout 30 die-gap steps over the parison lengthShort bottles and jars with few diameter changesSegment length against container height; actuator response
100 pointsAbout 100 steps; finer control at neck, handle and waist5–16 L handled bottles and jerrycans with visible profile changesWhether the extra points are usable at your cycle time
200 pointsVery fine axial resolution for tall or strongly contoured partsTall containers, multi-layer heads, tight wall targetsController model, data-entry workload, operator training

Swipe the table to see all columns →

5L Plastic Bottle Blow Molding Machine | Control Screen and Mold Run A representative 5l plastic bottle blow molding machine | control screen and mold run clip. The machine, mold and configuration in your project may differ.

How to specify the control package on a 5–16 L machine

On a 5–16 L line, the control package is usually specified together with the clamp and extruder, because the recipe has to match the mold. Take an ES-10LS: 10 L container, 110 kN clamp, 450 × 480 mm platen, 70–75 mm screw and 80–100 kg/h output. The PLC and parison controller are chosen as a package for that platform. Which items are standard and which are options should be listed line by line in the quotation, with brand and model — that is the difference between a usable specification and a name on a page. Ask for each item below to be marked standard or optional.

  • Main PLC and HMI: brand, model, program access policy.
  • Parison controller: brand, point count, axial or radial function.
  • Die-gap actuator: electric or hydraulic, response at your cycle time.
  • Temperature control: number of zones and thermocouple type.
  • Recipe memory: how many mold recipes, and who can edit them.
  • Spare-parts list: recommended first kit with lead times.

At acceptance, run the mold with production material and record the die-gap profile, cycle time and wall-thickness readings at several heights. That record is the baseline for every later comparison; without it, a brand change or a controller upgrade cannot be measured.

The ES-10LS sits in the0.1–16 L single-station series. If you run a 5 L jerrycan, compare machine sizes in5 L vs 10 L jerrycan machineand see how the die gap is corrected inwall-thickness control.

What to send for a quotation

A control quotation is only comparable when both sides start from the same inputs. Send:

  • Container drawing with height, neck finish, handle position and target wall range.
  • Material and layer structure — PE, PP, HDPE, HDPP or a multi-layer build.
  • Cavity count and expected output per shift.
  • Your preferred PLC or parison-control brand, if you have one, and the reason — existing spares or plant standard.
  • Site voltage, compressed-air supply and ambient conditions.
  • Any line-data or communication requirement, so the protocol can be confirmed.

Still comparing brands? Send the drawing through thecontact pageand ask for the control list with model numbers.

Source: E-SHION product data. Specifications are subject to change without notice; customization is available.

This guide is written for production and procurement decisions. It uses published figures where available and avoids unverified performance claims.