Reference image
Double-Station Extrusion Blow Molding Machine
QQ-16LD
Double-station · 0.1–16 L · max. 16 L
The QQ-16LD is a double station model with a catalog maximum product volume of 16 L, 155 kN clamping force and 130–160 kg/hr extruding capacity. Compare the full catalog table below with the other models in this series.
- Max. product volume
- 16 L
- Clamping force
- 155 kN
- Extruding capacity
- 130–160 kg/hr
- Installed power
- 50–65 kW
Technical data
Full catalog specifications
Catalog reference data. Final configuration, tooling and performance are confirmed in the quotation.
| Parameter | Catalog value | Unit |
|---|---|---|
| Max. product volume | 16 | L |
| Die-head center distance — two heads | 260 | mm |
| Die-head center distance — three heads | 180 | mm |
| Die-head center distance — four heads | 130 | mm |
| Clamping force | 155 | kN |
| Platen spacing (daylight) | 230–620 | mm |
| Die plate size | 500 × 490 | mm |
| Screw diameter | 90 | mm |
| Screw L/D ratio | 25:1 | L/D |
| Extruding capacity | 130–160 | kg/hr |
| Die-head heating power | 6–13 | kW |
| Screw heating power | 8–10 | kW |
| Extrusion motor power | 30–40 | kW |
| Oil-pump motor power | 11–15 | kW |
| Air pressure | 0.8 | MPa |
| Air capacity | 1–1.5 | m³/min |
| Installed power | 50–65 | kW |
| Actual power (reference) | 40–50 | kW |
| Machine size | 4.5 × 2.7 × 3.1 | m |
| Machine weight | 10 | t |
Source: E-SHION product catalog, pages 05–10. Specifications are subject to change without notice; customization is available.
Typical applications
Typical container types for this platform
Household & Personal Care Packaging
Shampoo, detergent, lotion and cleaner bottles where surface quality and repeatable wall thickness matter.
View
Food & Beverage Packaging
Oil, water, juice, dairy and food bottles, from small formats to multi-litre containers.
View
PETG Clear Packaging
Transparent bottles, jars and shaped containers where clarity, gloss and surface finish drive the specification.
ViewRelated models
Compare within the same series
Questions buyers ask
About the QQ-16LD
The answers use the published catalog values. Mold compatibility and final performance are checked per project.
FAQWhat is the maximum product volume of the QQ-16LD?
The catalog lists a maximum product volume of 16 L for the QQ-16LD. This is a platform limit; confirm the actual container drawing against the mold and platen.
What clamping force and extruding capacity does the QQ-16LD list?
The catalog lists 155 kN clamping force and 130–160 kg/hr extruding capacity. These are reference values; the final requirement depends on the mold, material and cycle.
Can the QQ-16LD run a customer-supplied mold?
Possibly. Provide the mold drawing, dimensions, thickness, weight and cavity layout. The team checks platen size, platen spacing, clamping force, die-head position and mounting details before confirming compatibility.
Request a quotation for QQ-16LD
Quote the QQ-16LD against your container.
Send the drawing, material, output target and any existing mold. We will confirm whether this model fits or recommend the correct platform.