The phrase "training included" costs nothing to write and can cost weeks to discover. A machine lands, the installation team leaves, and the night shift is still guessing at the die-gap setting, the recipe screen and the alarm list. The real cost is not the training fee — it is the delayed start-up, the scrap produced while learning, and the argument about who was supposed to cover what.
Make training a contract term, not a schedule line
Operator training is normally available with an E-SHION machine, but it is a commercial term, not a default. The contract should fix who is trained, how many days, at which location, how many technicians attend, what the curriculum covers, and what the trainee signs at handover. Everything else is a promise.
Two delivery points are normal: the Huangyan factory acceptance test before shipment, and your plant after installation. Factory training suits a team that can travel and wants to run the machine under power before it is packed. On-site training suits a plant that wants the agenda built around its own mold, material and shift pattern. Neither is automatically better. The useful question is which one leaves your own staff able to complete a mold change and read a wall-thickness fault without calling anyone.
Most training projects land in the0.1–16 L single-station range, where die plates from 320 × 380 mm to 500 × 490 mm set the mold-change drill. The safety rules that belong in level one are set out inblow molding machine safety.
The three levels, side by side
A curriculum that stops at "how to press start" produces an operator who can run one product and halts at the first alarm. The agenda below separates three levels, because each answers a different question and each is often bought at a different depth. Read the duration column as a proposal to be agreed, not a published entitlement.
| Level | What is taught | What it fixes on the floor | Duration |
|---|---|---|---|
| Operator | Start-up and shutdown sequence; HMI recipe recall and save; mold change on die plates from 320 × 380 to 880 × 780 mm; guards, lockout and safe access | A repeatable shift start and fewer wrong-recipe runs | Fixed in the contract |
| Maintenance | Heater-band replacement; filter cleaning; lubrication points; scheduled replacement of wearing parts | Heater and filter faults caught before they mark the parison | Fixed in the contract |
| Troubleshooting | Parison and wall-thickness checks; defect diagnosis for wall variation, bubbles and weak pinch-off; die-gap and temperature adjustment within set limits | Faults traced to a cause instead of a guess | Fixed in the contract |
Swipe the table to see all columns →
Where training runs, and what the clip shows
The clip below is a mold and container take-off sequence on a representative 5 L jerrycan machine. Watch the clamp, the take-off and the rhythm of the cycle rather than the container shape — those are the motions a trainee has to repeat safely, and they are what the level-one agenda is built around.
The handover checklist that ends the argument
Sign-off works best as things the trainee does while a technician watches, not subjects the technician covered. A workable list has six lines. Start the machine from cold and pull a stable parison. Save and recall a recipe by name. Complete a mold change at the project's platen size and check clamp force against mold projection area and blowing pressure. Name the likely cause of three faults before touching a setting: a wall-thickness drift, a bubble and a weak pinch-off. Replace a heater band and log it. Explain the guard and lockout rules to a colleague. Each line takes a name, a date and a signature; a line that cannot be demonstrated is not a training gap but an open item in acceptance.
If the project runs double-station machines, two clamp units have to be covered before sign-off; the0.1–16 L double-station rangelists the models. For what a trained team has to hold on a running bottle line, seeshampoo bottle production.
What to send for a quotation
- Container drawing or a sample: volume, neck finish, wall-thickness target and the material you will actually run.
- Mold list: how many molds, cavities per mold, and the largest platen size any of them needs.
- Machine shortlist: single or double station, and the model you are comparing, so the agenda matches the clamp and the control system.
- Site facts: power supply, compressed air, chilling and the space around the machine, because on-site training is scheduled around installation.
- Team profile: operators per shift, whether anyone has extrusion blow molding experience, and the language the training will be delivered in.
- Commercial frame: preferred location — Huangyan FAT or your plant — the date window, and whether training is priced inside the machine order or separately.
A training clause that names levels, days, technicians, location and a signed checklist is worth more than any promise of "full support". It is also the version your production manager can plan a start-up around.
Source: E-SHION product data. Specifications are subject to change without notice; customization is available.
This guide is written for production and procurement decisions. It uses published figures where available and avoids unverified performance claims.