Reference image
Single-Station Extrusion Blow Molding Machine 20–50 L
ES-50L
Single-station · 20–50 L · max. 50 L
The ES-50L is a single station model with a catalog maximum product volume of 50 L, 260 kN clamping force and 110–160 kg/hr extruding capacity. Compare the full catalog table below with the other models in this series.
- Max. product volume
- 50 L
- Clamping force
- 260 kN
- Extruding capacity
- 110–160 kg/hr
- Installed power
- 105–120 kW
Technical data
Full catalog specifications
Catalog reference data. Final configuration, tooling and performance are confirmed in the quotation.
| Parameter | Catalog value | Unit |
|---|---|---|
| Max. product volume | 50 | L |
| Clamping force | 260 | kN |
| Platen spacing (daylight) | 400–1000 | mm |
| Die plate size | 880 × 780 | mm |
| Screw diameter | 90 | mm |
| Screw L/D ratio | 25:1 | L/D |
| Extruding capacity | 110–160 | kg/hr |
| Die-head heating power | 5.5–14.5 | kW |
| Screw heating power | 16–20 | kW |
| Extrusion motor power | 37–45 | kW |
| Oil-pump motor power | 22 | kW |
| Air pressure | 0.8 | MPa |
| Air capacity | 0.8–1.0 | m³/min |
| Installed power | 105–120 | kW |
| Actual power (reference) | 35–50 | kW |
| Machine size | 5 × 2.7 × 3.5 | m |
| Machine weight | 13 | t |
Source: E-SHION product catalog, pages 05–10. Specifications are subject to change without notice; customization is available.
Typical applications
Typical container types for this platform
Related models
Compare within the same series
Questions buyers ask
About the ES-50L
The answers use the published catalog values. Mold compatibility and final performance are checked per project.
FAQWhat is the maximum product volume of the ES-50L?
The catalog lists a maximum product volume of 50 L for the ES-50L. This is a platform limit; confirm the actual container drawing against the mold and platen.
What clamping force and extruding capacity does the ES-50L list?
The catalog lists 260 kN clamping force and 110–160 kg/hr extruding capacity. These are reference values; the final requirement depends on the mold, material and cycle.
Can the ES-50L run a customer-supplied mold?
Possibly. Provide the mold drawing, dimensions, thickness, weight and cavity layout. The team checks platen size, platen spacing, clamping force, die-head position and mounting details before confirming compatibility.
Request a quotation for ES-50L
Quote the ES-50L against your container.
Send the drawing, material, output target and any existing mold. We will confirm whether this model fits or recommend the correct platform.