A blow mold can be the second-largest line on a machine order, yet it often hides inside one lump sum with a single '50% with order' clause. When trial bottles fail, or when you later want to run the same mold on a second machine, nobody can say what was paid for what, or who owns the steel. The fix is unglamorous: price the mold separately and tie every payment to a milestone you can inspect.
How should blow mold payments be structured?
Split the mold price into four payments tied to verifiable events: approved drawings, steel received and rough-machined, trial samples accepted, and shipment. E-SHION does not publish a fixed deposit percentage; the nodes and shares are agreed in the contract, so negotiate the schedule against evidence rather than a round number.
Milestone payment works differently. Each release buys a document or a physical result you can hold: a signed drawing revision, a steel certificate, a measured sample, a packing list. A mold is a one-off tool, not a stock item — once steel is cut to the wrong neck or the parting line sits in the wrong place, the money is already spent.
Keep the mold as its own line in the machine contract, or as a separate purchase order, with its own drawing revision, price and delivery date. Market prices for a simple two-cavity bottle mold are roughly USD 2,000–5,000; larger multi-cavity tools commonly run USD 15,000–35,000. Those are market frames, not E-SHION list prices; confirm the actual figure in the quotation, because it depends on cavity count, steel, polishing, inserts and destination. Lead time is commonly 20–60 days after drawing approval, and that clock starts when you sign the drawing, not when the deposit clears.
A four-node payment schedule you can attach to the contract
| Payment node | What the buyer verifies | Evidence to keep | Clause to agree |
|---|---|---|---|
| 1. Drawing approval | Cavity layout, parting line, neck and handle detail, shrinkage, water circuits, platen interface | Signed 2D/3D drawing revision | No steel cut before signature; later changes priced separately |
| 2. Steel and rough machining | Steel grade and block size, roughing started | Material certificate, photos of blocks | Released against a certificate, not a verbal update |
| 3. Trial samples | Weight, wall thickness, neck ovality, pinch-off, insert position | Measurement report and retained samples | Accept/reject limits; who pays for a re-trial |
| 4. Final acceptance and shipment | Mold runs in your machine at agreed settings, spares packed | Final inspection sheet, packing list | Balance against shipping documents; drawings handed over |
Swipe the table to see all columns →
Two clauses are worth more than a discount. The first covers a stop at node two: who keeps the partly machined block, how scrap value is counted, and whether you can buy out the tool as it stands. The second covers changes after drawing approval, so a moved water line does not reopen the whole quotation. Both belong in the mold annex, not in email.
What should 'mold approved' actually mean?
Approval should be a measurement, not a compliment. Run the trial on the machine that will take the mold, with the production material and parison programme you intend to use, then record weight, wall thickness at agreed points, neck dimensions and pinch-off condition on a sheet both sides sign. Check clamp force against mold projection area and blowing pressure, not container volume alone: on a 10 L part, the ES-10LS offers 110 kN on a 450 × 480 mm platen, so the footprint and mounting pattern must match that interface before the trial.
Who owns the mold, and how does title move?
Ownership should follow payment, and the contract should say so in one sentence: title passes on the final mold payment, or on delivery, whichever you agree. If you pay in full before shipment, the mold is your property sitting in the seller's factory, so agree who insures it and who stores it. Write a retrieval right too: after full payment you may collect the mold, and the seller keeps no lien beyond unpaid amounts. Then list the wear parts — neck inserts, pinch-off inserts, blow pins, seals — with replacement prices, because those decide how long the tool lasts.
Two cross-checks make the negotiation easier. Compare the container you are tooling for in12 L container blow molding, confirm the machine side in thesingle-station 0–16 L range, and if a second machine may share the mold, check thedouble-station 0–16 L rangefor a compatible platen before you sign.
What to send for a quotation
Send these items and the mold can be quoted against your container instead of a guess:
- Container drawing in 2D and 3D, including neck finish, handle, logo and date insert
- Volume, target weight and material grade, with colour and recycled content if any
- Required output per hour and expected cavity count
- Machine model, or the platen and tie-bar drawing if the machine is already installed
- Trial acceptance limits: which dimensions are measured and on how many samples
- Ownership, retrieval and wear-part wording your purchasing team needs
- Destination, Incoterms and import documents
- Required delivery date counted from drawing approval
Source: E-SHION product data. Specifications are subject to change without notice; customization is available.
This guide is written for production and procurement decisions. It uses published figures where available and avoids unverified performance claims.