<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
<channel>
<title>E-SHION blow molding guides</title>
<link>https://www.e-shionmachinery.com/knowledge/</link>
<description>Selection, production, compliance and troubleshooting guides for extrusion blow molding machines.</description>
<language>en</language>
<lastBuildDate>Thu, 12 Nov 2026 00:00:00 +0000</lastBuildDate>
<atom:link href="https://www.e-shionmachinery.com/feed.xml" rel="self" type="application/rss+xml"/>
<item>
<title>Blow Molding Machine Power Consumption: Installed vs Actual kW</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molding-machine-power-consumption/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molding-machine-power-consumption/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Installed kW sizes the electrical supply; actual running kW drives the energy cost per good part. Learn to read both before you compare machine quotes.</description>
<category>Cost</category>
</item>
<item>
<title>UN-Certified Jerrycans: 3H1, 1H1 and What the Machine Must Hold</title>
<link>https://www.e-shionmachinery.com/knowledge/un-certified-jerrycan-production/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/un-certified-jerrycan-production/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>The UN mark is issued for a packaging design type, not a blow molding machine. What 3H1 and 1H1 mean, the four tests, and what production must reproduce.</description>
<category>Compliance</category>
</item>
<item>
<title>Food Contact Compliance in Blow Molding: Four Documents, Three Markets</title>
<link>https://www.e-shionmachinery.com/knowledge/food-contact-compliance-blow-molding/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/food-contact-compliance-blow-molding/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A food-contact claim is a document chain, not one resin grade. What belongs in the EU, US and China file, who signs the DoC, and what to send for a quote.</description>
<category>Compliance</category>
</item>
<item>
<title>HDPE Chemical Compatibility: What a Drum Can Hold</title>
<link>https://www.e-shionmachinery.com/knowledge/hdpe-chemical-compatibility/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/hdpe-chemical-compatibility/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A resin table screens; the filled pack decides. Match the HDPE grade, wall, seam and closure to the real concentration, temperature, dwell and stacking load.</description>
<category>Materials</category>
</item>
<item>
<title>5-Gallon Water Bottle Blow Molding: Neck, Wall and Machine Choice</title>
<link>https://www.e-shionmachinery.com/knowledge/5-gallon-water-bottle-blow-molding/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/5-gallon-water-bottle-blow-molding/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A buyer's guide to 5-gallon (18.9–19 L) water bottle blow molding: the 55 mm neck, wall map, handle and annealing, plus the HDPE vs PC/PET boundary.</description>
<category>Industrial containers</category>
</item>
<item>
<title>Edible Oil Bottle Blow Molding: Machine and Mold Selection</title>
<link>https://www.e-shionmachinery.com/knowledge/edible-oil-bottle-blow-molding/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/edible-oil-bottle-blow-molding/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>How 1–20 L edible-oil bottles and jugs are quoted: platform, handle, neck, wall, fill temperature and the mold scope to confirm.</description>
<category>Industrial containers</category>
</item>
<item>
<title>CE and UKCA for Blow Molding Machines: File, DoC and 2027 Rules</title>
<link>https://www.e-shionmachinery.com/knowledge/ce-ukca-blow-molding-machine/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/ce-ukca-blow-molding-machine/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>What a CE or UKCA file contains, which EU instrument applies before and after 20 January 2027, and what to send for a quotation.</description>
<category>Compliance</category>
</item>
<item>
<title>From Parison to Finished Bottle: Inside One Blow Molding Cycle</title>
<link>https://www.e-shionmachinery.com/knowledge/parison-to-finished-bottle/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/parison-to-finished-bottle/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A shop-floor walkthrough of extrusion blow molding: what happens at the die, mold, blow pin and take-out, and what decides if the bottle matches the drawing.</description>
<category>Process</category>
</item>
<item>
<title>PPWR Recycled Content: 2030 Targets by Packaging Category</title>
<link>https://www.e-shionmachinery.com/knowledge/ppwr-recycled-content-blow-molding/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/ppwr-recycled-content-blow-molding/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>The PPWR recycled-content target depends on the packaging category, not the machine model. Map the container first, plan the recyclate grade, mold and trial.</description>
<category>Compliance</category>
</item>
<item>
<title>HDPE ESCR: Why Containers Crack Weeks After Filling, and How to Test</title>
<link>https://www.e-shionmachinery.com/knowledge/hdpe-container-stress-cracking/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/hdpe-container-stress-cracking/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A container can pass leak and drop tests and still split weeks later. Check the resin, molded-in stress and chemical before you change the machine.</description>
<category>Troubleshooting</category>
</item>
<item>
<title>Higher PCR in HDPE Bottles: Requalification Checklist</title>
<link>https://www.e-shionmachinery.com/knowledge/pcr-bottle-requalification/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/pcr-bottle-requalification/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Each PCR ratio change reopens qualification. Run a 0/15/30/50 percent matrix, rerun drop, stack, ESCR, odour and colour, and keep each trial traceable by batch.</description>
<category>Industrial containers</category>
</item>
<item>
<title>HDPE Blow Molding Resin: How to Read Density and Melt Index</title>
<link>https://www.e-shionmachinery.com/knowledge/hdpe-blow-molding-resin-grade/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/hdpe-blow-molding-resin-grade/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Density sets stiffness, shrinkage and ESCR; melt index sets flow and parison sag. Read both with their test conditions before comparing supplier sheets.</description>
<category>Materials</category>
</item>
<item>
<title>Pesticide Bottle Blow Molding: UN 3H1, 63 mm Neck and Barrier Options</title>
<link>https://www.e-shionmachinery.com/knowledge/agrochemical-bottle-production/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/agrochemical-bottle-production/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A 63 mm neck, a UN 3H1 design type and a solvent barrier are three jobs. What to freeze before the mold, and which double-station platform fits 1–5 L.</description>
<category>Machine selection</category>
</item>
<item>
<title>UN Packaging Certification for 3H1 Jerrycans: Test Report, Marking and Records</title>
<link>https://www.e-shionmachinery.com/knowledge/un-packaging-test-report-marking/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/un-packaging-test-report-marking/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A UN mark is issued for a design type, not a machine. The document pack behind a 3H1 order, the seven mark elements, and where the machine enters.</description>
<category>Compliance</category>
</item>
<item>
<title>Blow Molding Machine Contract: 12 Clauses to Fix Before You Sign</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molding-machine-contract-checklist/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molding-machine-contract-checklist/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A contract is only as strong as its annexes. Twelve clauses that turn subject-to-contract wording into drawings, test criteria and dated documents.</description>
<category>Machine selection</category>
</item>
<item>
<title>PETG Jars: Extrusion Blow Molding vs Injection Stretch Blow Molding</title>
<link>https://www.e-shionmachinery.com/knowledge/petg-jar-extrusion-vs-injection-blow/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/petg-jar-extrusion-vs-injection-blow/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Most PETG jar content assumes injection stretch blow. Wide-mouth, thick-wall jars often fit extrusion blow better. Compare tooling, MOQ and neck finish.</description>
<category>Materials</category>
</item>
<item>
<title>HDPE Bottle Lightweighting: Top Load, Drop Test and Wall</title>
<link>https://www.e-shionmachinery.com/knowledge/hdpe-bottle-lightweighting/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/hdpe-bottle-lightweighting/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Weight is an output, not a lever. Four design levers and two resin inputs set the floor; here is a 5/10/15% trial plan with the test at each gate.</description>
<category>Materials</category>
</item>
<item>
<title>Food-Contact Migration Testing for Blow Molded Containers</title>
<link>https://www.e-shionmachinery.com/knowledge/food-contact-migration-testing/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/food-contact-migration-testing/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Overall or specific migration, which simulant and condition apply, and when a colour, PCR or resin change forces a retest.</description>
<category>Compliance</category>
</item>
<item>
<title>Blow Molding Pinch-Off: Land, Seam Strength and Leak Paths</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-mold-pinch-off/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-mold-pinch-off/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A seam leak is a land, blade and parison problem before it is a tonnage problem. How to cut and pull the weld, read the cross-section and map the leak.</description>
<category>Process</category>
</item>
<item>
<title>Blow Molding Machine Floor Space: Footprint, Clearance and Layout</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molding-machine-floor-space/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molding-machine-floor-space/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A 5 L machine is 3.8 × 1.8 m and a 20 L line 5 × 2.7 m, but that is the machine envelope. Mold-change, take-out and auxiliary clearances decide the room.</description>
<category>Machine selection</category>
</item>
<item>
<title>HDPE Bottle Warping: Why Blow Molded Containers Deform and How to Fix It</title>
<link>https://www.e-shionmachinery.com/knowledge/hdpe-bottle-warping/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/hdpe-bottle-warping/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Warpage, paneling and shrinkage are different failures. Cut a wall map, balance mold cooling, measure demold temperature, then check the fill or stack.</description>
<category>Materials</category>
</item>
<item>
<title>ISO 22241 AdBlue Tanks: Material, Cleanliness and Contamination Control</title>
<link>https://www.e-shionmachinery.com/knowledge/iso-22241-adblue-tank-production/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/iso-22241-adblue-tank-production/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>AUS 32 conformity is decided by what touches the urea, not by the resin name. The ISO 22241-1 limits, the metals to keep out, and the contact path to control.</description>
<category>Compliance</category>
</item>
<item>
<title>Blow Molded Container Stacking: Load, Creep and the Number to Specify</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molded-container-stacking/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molded-container-stacking/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Stacking is a top load in kilograms at a temperature and a time, not a layer count. The calculation, the test method, and what to give the mold maker.</description>
<category>Industrial containers</category>
</item>
<item>
<title>Shipping a Blow Molding Machine from China: Packing, Container and Landed Cost</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molding-machine-shipping-packing/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molding-machine-shipping-packing/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Freight is one line in a landed-cost stack. How machine weight and volume pick the container, the five packing steps, FOB vs CIF, and the documents to check.</description>
<category>Cost</category>
</item>
<item>
<title>Blow Molding Machine Installation: Site Readiness Checklist</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molding-machine-installation-commissioning/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molding-machine-installation-commissioning/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Five site inputs decide whether commissioning starts on arrival: floor and lifting, power, air, water and destination voltage. What to confirm first.</description>
<category>Machine selection</category>
</item>
<item>
<title>Blow Molding Machine Lead Time: Four Clocks, One Schedule</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molding-machine-lead-time/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molding-machine-lead-time/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>Four clocks, not one lead time: machine slot, mold, FAT and sea freight. Build a dated schedule from deposit to ETD; mold time starts on drawing approval.</description>
<category>Machine selection</category>
</item>
<item>
<title>Blow Molding Machine Spare Parts: What to Stock Before Start-Up</title>
<link>https://www.e-shionmachinery.com/knowledge/blow-molding-machine-spare-parts/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/blow-molding-machine-spare-parts/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A two-tier spare-parts plan for extrusion blow molding: what to order with the machine for the first month, and what to keep for years one to three.</description>
<category>Machine selection</category>
</item>
<item>
<title>Food-Grade Recycled HDPE: What EU 2022/1616 Requires</title>
<link>https://www.e-shionmachinery.com/knowledge/food-grade-recycled-hdpe/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/food-grade-recycled-hdpe/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>What Regulation (EU) 2022/1616 actually asks of a recycled HDPE supplier, which routes exist, and the documents to check before you run food-contact bottles.</description>
<category>Materials</category>
</item>
<item>
<title>Milk Bottle Blow Molding: 1–2 L HDPE, 38 mm Neck and Top-Load Control</title>
<link>https://www.e-shionmachinery.com/knowledge/milk-bottle-production/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/milk-bottle-production/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>How to specify a double-station extrusion blow molding machine for 1–2 L HDPE milk bottles: neck finish, top-load stiffness, cavity count and measured output.</description>
<category>Machine selection</category>
</item>
<item>
<title>Fuel Jerrycan Blow Molding: 5–20 L, UN 3H1 and Handle Design</title>
<link>https://www.e-shionmachinery.com/knowledge/fuel-jerrycan-production/</link>
<guid isPermaLink="true">https://www.e-shionmachinery.com/knowledge/fuel-jerrycan-production/</guid>
<pubDate>Thu, 12 Nov 2026 00:00:00 +0000</pubDate>
<description>A 5–20 L fuel jerrycan selection and mold guide: which E-SHION model fits, what UN 3H1 tests, and what to fix before the mold is cut.</description>
<category>Machine selection</category>
</item>
</channel>
</rss>